davidaltmejd.com is a participant in the Amazon Associate program, we may earn a small commission from the qualifying purchases of our recommended links. Learn more.

11 Steps For Audi A4 Headlight Bulb Replacement (DIY)

The Audi A4 headlight bulb replacement must be conducted when the bulb burns out or drops in performance.

A faulty headlight bulb impairs your vehicle’s performance, especially at night.

When your headlights stop working, there is no way you would go far or drive at a comfortable pace.

The decision to continue driving with a broken headlight bulb at night is not safe. It may lead to road accidents.

Asides from reducing road visibility, it may also make it very difficult for other road users to notice your vehicle.

This is why you need to act responsibly and change your headlight bulbs as soon as they become faulty.

This article discusses how you can replace or change your Audi A4 headlight bulbs whenever they get damaged or fade out.

The process is very straightforward when you know the steps to take and the right tools to use.


Audi A4 Headlight Bulb Replacement Cost

To conduct the replacement exercise independently, you need a new bulb with a similar model number as the damaged bulb.

The bulb’s model number can be found in your vehicle’s service or repair manual.

Depending on the brand and quality of bulb you intend to buy. On average, you may need to budget between $15 and $50 for a new bulb.

Most times, the expensive designs come in 2 units and they offer extra brightness and a longer lifespan.

If you are consulting a technician, you may need to budget between $60 and $120 on average to get the headlight bulb replacement done.

Tools for replacement

  • Long and flat-edged screwdriver
  • New headlight bulb or bulbs
  • Needle nose pliers
  • Torx screwdriver (T30)

Audi A4 Headlight Bulb Replacement Step By Step Guide

Step 1

Perform this exercise in a clean, spacious, and well-lit section of your garage or home

Step 2

Get all the necessary tools in order

Step 3

Detach the headlight housing from your vehicle. This guarantees easy access to the damaged bulb.

To remove the housing, you need to first open the hood of your car and disconnect the trim piece located above the grille.

The trim piece houses one of the mounting screws for any of the headlights.

Detach the headlight housing mounting screws using a Torx screwdriver.

There are 4 of them (2 at the top, and the other 2 beneath the headlight housing). Do not forget to disconnect the electrical connector from the housing.

Once the screws have been removed and the electrical connector has been separated, disconnect the headlight housing by sliding it forward or shaking it carefully.

Step 4

Remove the back cover of the headlight housing.

Step 5

Inside the headlight housing are wires and an electrical connector. Squeeze both ends of the connector, then pull it out of the headlight housing gently.

Step 6

Remove the affected or damaged bulb. You can easily do this by rotating the retaining rings until the bulb becomes free. Pull the bulb out gently.

Step 7

Install or insert the new bulb into the headlight housing. To hold the bulb in place, make sure you turn the retaining ring until it safely and securely holds the bulb in place.

Step 8

Reconnect the electrical connector

Step 9

Reinsert the back cover of the headlight housing

Step 10

Reattach the headlight housing back into your vehicle

Step 11

Tighten all the screws back to their various positions

The replacement process is easier if your vehicle uses the HID Bi-Xenon bulb.

The bulb socket can be separated from the headlight housing by turning it counter-clockwise.

Do not forget to disconnect it from the electrical connector.

Take out the damaged bulb from the bulb socket and replace it with a new one.

You can then return or reattach the bulb socket back to the headlight housing by turning it in a clockwise direction to hold it in place.

Some Audi A4 Headlight Bulb Replacement From Online (Top Picks)

01. Sinoparcel D3S HID Bulb


Highlighted Features

  • ‎‎3.54 x 5.12 x 2.17 inches
  • 0.41 pounds in weight
  • 35 watts & 12 Volts
  • 3200LM
  • Color: 8000K
  • 2 units

While the traditional halogen headlight bulbs have a lifespan of about 500 hours, Sinoparcel D3S HID Bulb is built to last for about 8,000 hours.

It also offers stable and impressive light output. The package comes with 2 units of well-arranged, long-lasting, and efficient bulbs.

When you drive in a car that has these bulbs installed in the headlights, you will attain a more reliable level of brightness, ensuring you see the road clearly at night.

Overall, features such as advanced performance, affordability, ease of installation, and longevity make this design a worthy investment for car owners who seek top value for their money. You won’t have to conduct a bulb replacement often.



Highlighted Features

  • Xenon D1S bulb
  • A perfect fit for 02-09 Audi A4 & S4
  • 1 unit
  • Built-in igniter
  • Color temperature: 4300 Kelvin
  • Lasts up to 10,000 hours

This OEM headlight bulb offers impressive performance and quality that is very similar to factory bulbs.

If you are considering a headlight bulb that guarantees effectiveness and reliable performance over several miles. Here is a design you can consider.

The installation is straightforward, and it is a perfect fit for the 2002 to 2009 Audi A4 and Audi S4 models.

The level of brightness it offers is impressive, making it a solid unit for late-night trips.

This bulb has a lifespan of about 10,000 hours and a 4300 Kelvin bright white color temperature.

Compared to halogen bulbs, the New Genuine OEM bulb is compact, brighter, and guarantees clearer illumination.

If you want to distinguish between the Audi Q3 and Q5 then you might read this article.

03. Philips 42302C1 D3S


Highlighted Features

  • ‎2.1 x 3.7 x 2.1 inches in dimension
  • 0.1 pounds in weight
  • Color: white
  • Lumens:3200 ±450
  • 35 watts & 42 volts
  • 1 unit

Philips is a popular and well-trusted brand on the market when it has to do with HID headlight bulbs.

The popular Xenon HID technology was invented by this company, which has now become a standard recommendation by top car manufacturers across the world today.

This tells you how reliable and efficient this bulb is, making it an exciting addition to your vehicle’s electrical system.

The Philips 42302C1 D3S headlight bulb comes in one unit, and it is very easy to install on your vehicle.

Also, the bright light it produces while driving on the road at night is pretty impressive.

This bulb is rated at 42 volts and 35 watts, and it offers lumens 3200 ±450 at a 4200K color temperature.

Before you pick it up as a replacement option. Ensure it is an exact fit for your model year.

Also, make a purchase from a reliable marketplace such as Amazon for an original and top-quality product.

 04. Sportiva D3S HID Xenon Headlight


Highlighted Features

  • ‎3.7 x 3.6 x 2.1 inches in dimension
  • 0.31 pounds in weight
  • 2 units in a pack
  • Color temperature: 6000K
  • 35 watts & 12 volts
  • Lumen: 3200+ on average

This design uses up to about 35% lesser power than the halogen headlight bulbs.

It guarantees a brighter light supply while driving at night without putting excessive stress on your vehicle’s electrical system.

Sportiva D3S HID Xenon Headlight is rated at 12 volts and 35 watts.

It offers an advanced lumen output of 3200+ on average for improved performance over other available designs that fall within its category on the market.

According to the manufacturer, the headlight bulb is not affected by water and dust.

These qualities enhance longevity (over 3000 hours of continuous operation) and ensure you get an amazing value on your investment.

Also, the installation is not difficult (plug and play).

05. Carrep D3S D3R OEM HID


Highlighted Features

  • ‎3.8 x 1.5 x 3 inches in dimension
  • 0.1 pounds in weight
  • 35 watts & 12 volts
  • 2 units in a pack
  • 6000K color temperature
  • Waterproof and 3000 hours life span

These headlight bulbs consume lesser power or use lesser energy, yet produce a brighter light than halogen bulbs.

This is another affordable and reliable option you can consider for your vehicle. Thanks to its excellent performance and outstanding quality.

Carrep D3S D3R OEM HID is waterproof, ensuring the performance is not affected by extreme weather conditions such as snow and rainfall.

There are 2 units of headlight bulbs in the pack, and they can be installed with ease.

Each bulb produces a crystal white light, has a temperature of 6000k, and is rated at 35 watts and 12 volts.

All of these features combine excellently well to deliver a solid performance.

On average, these bulbs offer continuous solid brightness on the road for about 3000 hours.

People Asked Questions

What are headlight bulbs?

Headlight bulbs are important automobile accessories. They are lights placed or positioned at the front of every vehicle.

These lights illuminate the road while driving at night,  making your vehicle visible to other road users.

The headlight bulbs function with the help or support of your car’s electrical system.

When your vehicle is still running, the bulbs get powered by the alternator. If the engine is turned off and you need to put on the headlights for whatever reason.

In that case, the headlight bulbs are powered by the car’s battery.

How long does a headlight bulb last?

A headlight bulb has a limited lifespan. After a few hours of use, it may fade or burn out.

At this point, you will have to get the faulty unit replaced with a new one. Invest in a top-quality or well-known brand if you want a bulb that lasts longer.

On average, Halogen headlight bulbs can last between 350 and 1000 hours.

HID (High-Intensity Discharge) headlight bulbs last between 2000 to 10,000 hours, and the LED headlight bulbs last for about 40,000 hours.

When do I replace my headlight bulbs?

A blown-out bulb is the most common reason for headlight bulb replacement.

But it is important to point out that the headlight bulbs won’t necessarily have to go off unexpectedly.

When your headlight bulbs are due for replacement or getting weak, there are some signs you will notice.

For instance, the light from the headlight bulb may appear dim or blink when you turn it on, making it difficult to see the road clearly.

Whenever your headlight bulb starts giving a very low light output, it may be a sign of a bulb that is edging closer to the end of its service life.

At this point, you need a replacement.

What should I do if the headlight bulb fails to come on after replacing it with a new one?

Sometimes, the bulb will be in a perfect condition and still fail to come on as a result of an underlying issue that needs to be fixed.

You can only confirm this after replacing the perceived damaged bulb with a new one.

If the issue still remains the same, you may need to check other electrical components of your vehicle. Inspect the wiring, socket, terminal connections, and other related components for possible issues or faults.

Ensure the electrical connections are in a good condition (complete and secure).

How best can I check for a damaged or low-performing headlight bulb?

If you hardly drive your vehicle at night, or you drive on a well-lit road regularly. You may not detect a blown-out or low-performing bulb immediately.

Ensure you always ask a technician to inspect your lights whenever you take your vehicle to the mechanic’s workshop or service station to replace the oil.

This ensures your bulbs remain in good working condition at all times. Also, issues can be easily detected and fixed appropriately.

You may also make it a point of duty to inspect your bulbs yourself from time to time.

This task is easy and only requires you to turn on the lights, leave them on, and step out of your vehicle to check if they are bright enough.

The Final Thoughts

The Audi A4 headlight bulb replacement may not be one of the easiest tasks anyone would like to engage in.

Nevertheless, vehicle owners can complete this task with basic mechanical skills.

When you have the necessary tools and you follow the appropriate steps. You can complete the replacement process in about 40 minutes.

Make sure you check the details and specifications of your choice of bulb replacement to ascertain compatibility and fitment.